Basic Question from new user

Ecco

New member
Joined
Apr 16, 2020
Posts
1
Likes
0
Hi - I am on a MotiveWave trail (Ultimate Edition) and I am learning EW theory at the same time. A very simple question, I hope. When I first started using the MW software if I applied an Auto Elliott Wave study to a graph I found I could hover over a wave label (e.g. 2) and lines would appear to link to the other labels in the sequence. Now that functionality is not operating. Is there a configuration option to turn it back on again ? many thanks
 

Spin

Well-known member
Joined
May 22, 2019
Posts
91
Likes
12
Hello Ecco & welcome to the MW Community :)

It's been a while since I used MW to draw EWaves, but I vaguely remember...
I believe you can click on a any label in an EW-series, and then the platform will plot lines to the other labels in that same series. You can select which info is displayed then.

Look in Menu > Preferences > Elliott Wave > General
And perhaps also in Menu > Preferences > chart > Options

Be sure to right-click on any wave point as well, since there's more options hidden underneath.

And, finally, MW has loads of video-tutorials for reference:
https://support.motivewave.com/videos/
(the chapter for EW is at the very bottom of that page !)

Happy studying ! :geek:
 
Top