Hi! I need help to re-create the chart like Damon Pavlatos. Volume profiles per session (Asia, Europe, US). It is this possible with MotiveWave?
Re-creation of session Volume Profiles
- Thread starter GeonsVL
- Start date
Donovan2580
Well-known member
- Joined
- Sep 13, 2020
- Posts
- 431
- Likes
- 236
Should be no problem as long as you have the correct times...
Go to the TPO properties and enter the session times on this menu
Hope this helps 🤓
Donovan
Go to the TPO properties and enter the session times on this menu
Hope this helps 🤓
Donovan
I think Donovan's advice will provide you with one TPO that is colored three different ways. You might try creating it using components. I failed to put the Volume Profile on the right, but that can easily be added via the Volume Profile study set to however many days you want it to track. This was just quick-and-dirty to see if it put you on the correct path. Do try the other was as well!
Attachments
Donovan2580
Well-known member
- Joined
- Sep 13, 2020
- Posts
- 431
- Likes
- 236
I believe that you are correct - And I learned a new trick about dragging in the TPO from Components.
Thank you!!
Thank you!!
Actually, I thought of an even easier way, but I’m not near my computer to show an example. Set the sub-interval to whatever your sample shows (e.g. 5 min), find the letter/block that corresponds to the start time of each session, then right click on that block or letter to split the TPO. You can split the TPO at the open of each session. Again, you’d have to do it manually each day as far as I know.