Bid/Ask Not showing

GotEmAll

New member
Joined
Jul 22, 2021
Posts
1
Likes
0
Hello,

I have setup my charts for Crypto using Coinbase, I was all set to go and setup my Bid/Ask Volume Imprint however there seems to be a glitch. You can see on the attached picture (#1), that the Bar has been created but the Bid/Ask mostly reads "0". Did it for a couple of bars found it strange so I moved to another time frame and came back to the one I was on and surely enough now the bar was filled with the Bid/Ask properly (picture #2).
It does this on all the time frames, essentially If I'm not clicking and switching between time frames to "reload" the chart, all I get is "0" which unfortunately doesn't help me at all in its purpose.

Thank you,
 

Attachments

  • #2.jpg
    #2.jpg
    179.2 KB · Views: 15
  • #1.jpg
    #1.jpg
    181.7 KB · Views: 13

gravityflyer

Member
Joined
Feb 19, 2022
Posts
14
Likes
5
Hi all,

It appears that I have a somewhat similar problem... Occasionally my imprints don't appear. It seems to occur most commonly if I don't leave MW running on my computer or I shut down my computer halfway through a trading session. Today the imprints seem to suddenly disappear (image 1) and later in the day there seems to be smaller single line imprints at the bottom (image 2). Any thoughts or suggestions would be greatly appreciated!
 

Attachments

  • Screen Shot 2022-04-05 at 9.54.02 PM.png
    Screen Shot 2022-04-05 at 9.54.02 PM.png
    273.1 KB · Views: 11
  • Screen Shot 2022-04-05 at 9.58.22 PM.png
    Screen Shot 2022-04-05 at 9.58.22 PM.png
    226.4 KB · Views: 10
Top